The LANZONI X2 SYSTEM can be used in any place where doubling the parking space is needed, both outdoor and indoor, in apartment block garages housing complexes in both private and public parking garages. The system takes advantage of the height and not the surface area, and can handle any type of car, from the smallest to the heaviest. The LANZONI X2 SYSTEM is safe, reliable, and easy to use. This product has been designed based on the great importance that optimisation of space has in our society that is increasingly demanding and pragmatic, requiring immediate and sure solutions to problems. Thus, the LANZONI X2 SYSTEM certainly represents the solution to one of the biggest problems of modern society:
"THE LACK OF PARKING SPACES".
Electro-hydraulic car-lift for double parking
Mod. X2/22-P1
with fixed hydraulic power pack
and electric controls
Electro-hydraulic car-lift for double parking
Mod. X2/22
with movable hydraulic power pack
and electric controls
 
 
  • The LANZONI X2 electro-hydraulic car-lift is designed to double the parking space availability of public and private garages or outdoors.
  • It is possible to adjust it in 3 different slanting positions (on request) according to the space available and to the cars to be parked.
  • The sheet cover will protect the car parked under the platforms from all eventual drippings.
  • Safety devices
  • Safety device against the accidental lowering of the platform.
  • Stopping device on platform.
  • Overload safety valve.
  • Lowering speed control valve.
  • Safety valve against the breaking of the hydraulic circuit.
  • Man present controls.
  • Removable control key.
  • ACCESSORIES ON REQUEST
  • Hydraulic control box with manual pump for lifting in case of power failure.
  • Photosensor: it prevents the platform lowering when a car is parked under it.
TECHNICAL CHARACTERISTICS Mod.
X2/22 		Mod.
X2/22-P1 		Mod.
X2/22-H
Capacity 2500 kg 2500 kg 2500 kg
Maximum height from the floor 1740 mm 1740 mm 2070 mm
Lifting time 50 sec. 50 sec. 60 sec.
Lowering time 30 sec. 30 sec. 45 sec.
Single-phase motor * 220V 50HZ
1,1Kw 		220V 50HZ
1,1Kw 		220V 50HZ
1,5Kw
Maximum operation pressure 140 BAR 140 BAR 165 BAR
Controls voltage 24V 24V 24V
Net weight 931 kg 936 kg 998 kg
 
* Special motor voltages available on request
 

Maximum measures for
Mod. X2/22-P1

Click to enlarge image - 39kb. You can also download the drawing in DWG format or PDF format.
Click on above drawing to enlarge image, or:

Maximum measures for
Mod. X2/22-H

Click to enlarge image - 40kb. You can also download the drawing in DWG format or PDF format
Click on above drawing to enlarge image, or:
 
 
Home Page

export@lanzoni.com
LANZONI & C. S.n.c. - Via C. Pervilli, 12/D - Zona Industriale Mancasale - 42100 Reggio Emilia - Italy
Tel. ++39 0522 518700 - Fax ++39 0522 518747
Technical data are not binding and are subject to modification without notice